Swing arm rebuild how to?

[db]

I bought the All Balls rebuild kit, but didn't come with instructions saying what pieces went were. Is there a guide for this somewhere, or am I just going to have to match things up as I take them apart?

Thanks.

 

[yamarider]

Which kit are you talking about, the shock bushings and bearings or the swingarm pivot?

If it's the swingarm pivot, you shouldn't need instructions. Just take it apart and put the new stuff in just like the old stuff came out, it can only fit one way. I would also recommend adding a grease fitting to the pivot tube, the bearings will last forever as long as they're greased. If you don't install the fitting, just make sure you grease the crap out of the bearings with some good heavy duty grease when you put it together. Once the pivot bearings dry out they're gone.

 

[db]

Here's what I bought:

http://www.rockymountainatv.com/productDetail.do?navType=type&webTypeId=115&navTitle=Bearings&webCatId=14&stockId=40179&prodFamilyId=560#vehicleSelect


* Includes all the bearings in the link arm.
* All the shafts in the link.
* All the seals and spacers in the link and lower shock.
* Also includes the lower shock bearing.