-
If you have bought, sold or gained information from our Classifieds, please donate to YFM350 and give back.
You can become a Supporting Member or just click here to donate.
Wanted Rear Axle Carrier 90-04 Warrior
- Thread starter toader
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
91warrior
Well-Known Member
yea there are a good bit of members on here. i dont have an axle carrier though
DeadLastRacing
Well-Known Member
There are a ton of members, think almost 3,500. About half of those don't visit anymore and the other half just come and go at random points. I say, there are about a dozen of us that check the site on a regular basis. A few years ago, I remember seeing always at least 20+ on the site everyday, which isn't too huge but if you consider were talking about a quad thats not too too extremely popular anymore and is built on old technology, I'd say we do pretty good for our community. Just stick with the site and help keep it alive, It makes other members check to see the newest post!
DeadLastRacing
Well-Known Member
toader said:Cool thanks, I was just looking for some kinda action. Thanks for chiming in. I know it takes time.
I'm thinking a Banshee axle carrier could work on a Warrior, what our your thoughts on that?
Maybe for the 87-89 warriors, but not the newer ones for sure. The banshee has the small diameter brake rotor and the axle slides in from the opposite side so the offset could be different.
DeadLastRacing
Well-Known Member
the long bolt runs through for every year. the early years had a tube that ran from side to side. The early years used spacer tubes that floated, the later years use a welded tube. Think the carrier will work regardless.
