warrior is having problems... again!

[dillon14dj]

let me start this off by saying the last 3-4 times i took it out it was working fine (i always unhook the battery when i put the bike away), i just went to go out.. its been sitting for a day or 2 now, i hooked the battery back up go to start it to fine theres noo power at all!! the fuse seems to be fine i played around with some wires then it ended up having power.

so i went out (took a few vids) it shutted off once but started back up no problem, but then later on the clutch started making a sound?? so i turned around and came home after awhile the clutch stopped the sound, i got home turned the bike off.. waited 2mins and went to see if it would start again, and NOPE theres no power at all

 

[bones]

check all you grounds and tighten them .... what kind of sound did the clutch make ? like a metal on metal sound?

 

[dillon14dj]

just went out in the shed and what do you know theres power now? the lights turn on. and like a squeaking sound when i went to shift down, also seem to have lost a lil power too and when i go to shift up it seems to not go into gear sometimes and the rpm gets high. and like a loud noise from the front of the motor too till i shift up then it goes away (what is a lil wired seeing how the only thing i mostly hear on this bike is the muffler)

 

[mrjim0214]

brother,,,,,,,,im sure your a good kid.....................but i think its time to move on!!!!!! ,,,,,,,,,,,,,,,,,,,,im thinkin BICYCLE.....................IM kinda motor illerate........................but i listen 2 people................a bike got handle bars, a chain. sprockets, seat, frame and there own probs! start all over again, then theses guys will tell you how to hone,port,pollish, etc. im just sayin..........opcorn:

 

[bones]

i going to go with ... there must be parts of your old cam in bottom end pull the clutch cover off and look for metal ... you can use a magnet wand to check in by the trans threw the oil passages

 

[bones]

as for the lose of power get a torque wrench and tighten that head down right !!!!

 

[dillon14dj]

brother,,,,,,,,im sure your a good kid.....................but i think its time to move on!!!!!! ,,,,,,,,,,,,,,,,,,,,im thinkin BICYCLE.....................IM kinda motor illerate........................but i listen 2 people................a bike got handle bars, a chain. sprockets, seat, frame and there own probs! start all over again, then theses guys will tell you how to hone,port,pollish, etc. im just sayin..........opcorn:

i already have bicycle lol im not lazy i bike everywhere over town, and i plan on moving on i never stick with one quad for long haha thats how i make my money buying and selling. i just dont get this quad unless if its cuz when i was videoing i never changed gears (but then again i wasnt going any faster then what the gear goes)

 

[dillon14dj]

i going to go with ... there must be parts of your old cam in bottom end pull the clutch cover off and look for metal ... you can use a magnet wand to check in by the trans threw the oil passages

that went thru before man the last thread thing i up in it i said there was metal in the oil/filter. but then cleaned the filter off and put the new oil in (and have drove it 4 times already so far sence i got that head.. nd 2day is the 1st time ever it being like this) there is a small leak still coming from some place nd i ran out of oil so i couldnt top it up

 

[dillon14dj]

but ill go buy a torque wrench when i get the time and see about tightening the head more then take it back after as im reallly tight on money due to i just bought another car. but ill proly end up replacing the clutch?? ill see how it is once i get the new gear shifter that i ordered

 

[dillon14dj]

update: just took the body back off, i could only tighten 2 of the head bolts.. the other 2 would not tighten any more, i started the bike bck up and fine smoke is coming out of the muffler??? and theres a lil bit of air coming out of the front Right of the head, so i guess i need another gasket now?

 

[YAMAHAULER]

or you over tightened and cracked the case