Johnsonty1024
Well-Known Member
WebCams stage 2 camshaft .....Is this a good mod for my 87 warrior . If so let me know i found 1 for 50 bucks ....
Webcam Stage 2 Camshaft
- Thread starter Johnsonty1024
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
YAMAHAULER
Well-Known Member
Yes it is but I believe you will have to get stronger aftermarket valves and springs to be able to run it without problems
Gen1Pat
Well-Known Member
Well... hotcams says that the cam is designed for use with the stock springs. I have the stage 1 and have no probs with the stock springs. But that has to do with the ramp design and how past the valves open up. The only diff is the amount o duration between the two. It would prob be okay. But I'd more than likely use beefier springs.
DeadLastRacing
Well-Known Member
This guys talkin bout a webcam cam. You'd need to run HD springs with it. $50 is a good deal.
Gen1Pat
Well-Known Member
Oh **** may bad! At home sick. Had to leave work early. Not in my right frame of mind. Lol. Yeah $50 in good condition is a steel! Need hd springs man. And web also says that hardweld rockers are needed, too. But if you're getting that cam at that price, springs and rockers are a drop in the bucket!
bryanquad
Well-Known Member
i never had any good luck with webcams i blow a 400ex motor with like 4 hours on it with there cam and they paid for the motor to get redone .. so they stand by there stuff but it was all a wast of time to me .. hotcams is the best for your buck
crawlernut
Active Member
I ran the webcam stage 2 in my last warrior an had to run whitebros hd springs, the stock springs with that cam will make it sound like the valves are floating,stock springs are too soft, that stage 2 will make it go thumpthump!
