Will a Bruin 350 recoil work on a warrior?

[Beamesy7]

I have an 88 warrior that should have the recoil on it, but it was removed before I had gotten it, the electric start doesnt work very well even if I jumping off a car battery, she just doesnt turn over fast enough (fresh rebuild). Im opposed to pop starting with my fresh motor, id rather not force it to turn over, rather than pull it over. Question is, will a bruin 350 recoil bolt up? Im thinking it should, but I wanted some opinions firat! Thanks, beamesy 7!

 

[alex456123]

Yes it will but you should get a new battery and check all your grounds for continuity and the wires that connect the battery to the solenoid and the solenoid to the starter for continuity. If they don't replace the wires.

 

[Beamesy7]

Brand spankin new harness and ground wires.

 

[YAMAHAULER]

might be a bad starter pull it off and see if there is play in the starter gear if there is then the bearings in the starter are going which would cause it to turn over slow and hard

 

[Beamesy7]

I have had the starter out and cleaned all the brushes and everything, the motor is tight and spins nice, so idk, confusing lol.

 

[alex456123]

Then replace the solenoid.

 

[Beamesy7]

I was thinking that just before I read your post alex, great minds think alike!