MidwayUSA
Well-Known Member
Anyone have a Wolverine 350 timing chain cover that has the breather tube on it??
-
If you have bought, sold or gained information from our Classifieds, please donate to YFM350 and give back.
You can become a Supporting Member or just click here to donate.
Wolverine timing cover
- Thread starter MidwayUSA
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
DeadLastRacing
Well-Known Member
Timing chain cover with the breather tube?
MidwayUSA
Well-Known Member
Yep. The Wolverine had the tube coming off the timing chain cover instead of the crank case. I wouldn't have known except I just did my co-workers 98 Wolverine 350. Same head and jug as the Warrior just different bottom end.
duneracerweston
Well-Known Member
what do you need it for?
MidwayUSA
Well-Known Member
Warrior I just sold has the seal in the vent tube damaged and is pumping a little oil into the air box. Thought it was the rings I had just put in so I changed them out and it still does it. Anyway I want to block the breather tube on the crank case and run it off the timing cover instead. Until I can find one, I am going to put a long hose up along the frame with a breather on it. It is not a ton of oil, but I don't want to tear the bottom end down just to change that seal when otherwise the machine is fine.
MidwayUSA
Well-Known Member
Actually the long tube and filter worked very well so I am going to ditch the timing cover idea.
