Wont even crank

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Connor

Active Member
Joined
Jul 26, 2013
Messages
40
Reaction score
0
Hey fellas its been a while. Anyways the warrior has been sitting for about 3 months because of college and work so I just got back to it and replaced the peticock on the gas tank and now have everything in running order. However, it wont even crank when I push the button. I have charged the battery and the battery tester even says its good although I have no point of reference (no lights). When I press the button it is silent, not even a click. Yes it is in neutral. Could the solenoid or starter have went out in that short amount of time? Somebody please enlighten me
 
solenoid most Likely crapped out cross the posts on the top of the solenoid ... If it starts then solenoid is most likely the issue



Tapatalk - now Free
 
Jump the terminals on the solenoid quick and simple. If nothing then put a multimeter on the battery make sure you got 12 volts. If you do then run a temporary chassis ground from your negative. Stil dont work then ignition switch.
 
Last edited:
Back
Top