Ok I have been lurking for a while just checking things out. I just picked up an 03 warrior that needed a carb rebuild and chain. It has an fmf powerbomb, silencer and K&N filter. Rebuilt the carb and put in a 45 pilot and 150 main jet due to the pipe and intake. It was running super rich since. The plug is charcoal and it smokes like a freight train. Smoke looks like burning oil but smells like raw gas. The only thing on the carb is I have a bleed type pilot jet which I am going to change to a non-bleed but it does not seem like it can cause this much smoke. Compression is 130PSI and it loses about 10% on a leakdown test which is in the green. I have adjusted the valve lash and tried just about everything. I still think the issue is carb related. I even took the airbox lid off and the mixture screw 1 turn out and still super rich. One I put the stock pilot jet in I had a bottom end dead spot with a backfire like it was lean. This is driving me crazy. With the mods a 150 should not be this bad right?