20's with 12 Tooth front?

[deerman2701]

What would the warrior perform like with 20's in the back with a 12 tooth front and stock back?

would it be good for woods and hills?


i run stock back sprocket, 20's and a 14 front and i dunno if i like it..

 

[beastlywarrior228]

oo that wouldnt work out too well

 

[mopar1]

20s with a 12 in front would be pretty snappy I would think. Lots of torque but little to no top end.

 

[1998yamahawarrior]

1st, 2nd and possibly 3rd would be damn near useless. Not a very good if you like your quad. Mine has 13 tooth front pretty sure a 40 rear with 20's. Its really snappy down low.

 

[jgray44]

would dropping 1 tooth on the front make a noticable difference??

 

[1998yamahawarrior]

Really depends on what size sprocket your dropping one on. If I had a 14 tooth here I could judge the difference, as technically I should be running one. But I dont do alot of all out runs so for now, I can get away with a 13.

 

[elwood]

would dropping 1 tooth on the front make a noticable difference??

1 tooth in the front is like changing 3 in the rear, yes if will make a difference you will notice

 

[jasonp]

1 tooth in the front is like changing 3 in the rear, yes if will make a difference you will notice

I run a 16t on the front with 20's.

I like the 15t the best after trying different ones.

A 12T with 20's will work good for the woods but that is about it. You will be doing a lot of shifting.

 

[duneracerweston]

id say top speed be around 45mph

 

[bassballs818]

There is a whole thread with a chart on here. I think its a sticky in the tutorils section.

 

[jgray44]

hmm i have a 13 tooth that i might throw on there just to try it out then