40mm Edelbrock carb will it work

[350rider]

I have a friend that has one from a old quad.He told me I could have it.Do you think I could change the needle and make it work on warrior?
The warrior has full yoshimura exaust,weisco piston 10to1,light port and polish,web .390 cam,uni filter no lid.Thanks for any help.

 

[keglassg]

jet correctly and i dont know why not, i have a 38 on mine.

 

[jasonp]

I have a friend that has one from a old quad.He told me I could have it.Do you think I could change the needle and make it work on warrior?
The warrior has full yoshimura exaust,weisco piston 10to1,light port and polish,web .390 cam,uni filter no lid.Thanks for any help.

yeah it is a little big but get the jetting on and it should be ok.

 

[350rider]

Do you think the raptor intake will work?

 

[yamarider]

Not sure what you mean... what raptor intake, and what are you referring to as the intake? Do you mean will the carb fit a raptor intake manifold, or will a raptor airbox fit the carb?

 

[350rider]

Sorry the intake that bolt's to the motor and clamps to the carb.

 

[yamarider]

What did this 40mm edelbrock come off of? A yfz450 or something like that?

 

[jasonp]

Sorry the intake that bolt's to the motor and clamps to the carb.

Yes a raptor intake should work.

 

[350rider]

It came of a 500 predator.He's going to his shop some time next week to get it.So i'll know more about it then.Thanks for the help.

 

[350rider]

Well i got it today.I have to order a intake for it.But it looks like it should work.It has 17E needle do you think that will be o.k.

 

[dave76]

Well i got it today.I have to order a intake for it.But it looks like it should work.It has 17E needle do you think that will be o.k.

I'd try it first, BTW your quad is going to have "0" low end power.

 

[350rider]

I'm going to try it it's a 36x40mm oval.
If it don't work i'll put it on ebay.

 

[dave76]

If it's really 40mm let me know, mabe I'll trade you my 36mm Edel.

 

[350rider]

It will be a few months before i try it.If you want to try it i'll send it to you to try.

 

[dswwarrior350]

Well i got it today.I have to order a intake for it.But it looks like it should work.It has 17E needle do you think that will be o.k.

I'd try it first, BTW your quad is going to have "0" low end power.

Thats exactly what i was thinking. This carbs a little to big for the warrior IMO. The Edelbrock designed for it would make more power. Id take that carb and ebay it, take the money and buy the one made for it. Even if your motor was modded beyond belief i still think you would lose power. Bigger=less velocity=less fuel atomization...not better (in most cases).

 

[jasonp]

36x40mm is like a 38mm. So it should be ok but it will lack a little response and low-end but the mid range and top end will come alive a little more then a regular edel. This carb would work a much better for a stroker.

 

[350rider]

It's not 36x40 i got that from there website.It's more like 41mm round.I'm going to sell it and get the write one for it.Thanks for the help.If anyone want's it i'll sell it for 50.00 shipped.