caimanque89
Member
hi people i need a cdi of 90 - 95 mi warrior 350 dont start, please if anyone have a cdi send pm thanks
-
If you have bought, sold or gained information from our Classifieds, please donate to YFM350 and give back.
You can become a Supporting Member or just click here to donate.
90 - 95 warrior cdi
- Thread starter caimanque89
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
YAMAHAULER
Well-Known Member
9 times out of 10 the no spark issue on warriors has to do with the Stator pick up coil or source coil going bad usually not the cdi
only way to find out is by using a multi meter and ohm the resistance in the wires from the stator on the left side of motor
only way to find out is by using a multi meter and ohm the resistance in the wires from the stator on the left side of motor
caimanque89
Member
oh thanks, i dont have this info but tomorrow i check with fluke multimeter, i think that is cdi because i make all new harness, and in the starter circuit relay have 2 12v wires but dont have ground from the cdi for activate relay... 
