Aftermarket Airboxes?

[bones]

the pins at the front are the front mounts and you can easily see the rear mounts

 

['00 WO-YA!]

You are the man Bones! So it looks like the front slides into some holes & then the back will drop down onto the frame. I need to go look at my junk to see how the Warrior box mounts up. It can't be alot of trouble to mod & make work ya know.

 

[bones]

i have thought about putting a raptor air box in mine and what i was thinking of doing was making a 90* mount out of 1/16 of inch flat stock with rubber gromets for the front mounts to the warriors mounts and hoping the rear mounts would just line up and if they didnt then doing something kinda the same for the rear

 

['00 WO-YA!]

Heck, even the stock Raptor airbox looks like an improvement, lol! I like how the boot is straight instead of the boot being sorta Z shaped like ours.

 

[bones]

Heres where im at now. Im working on painting the chain adjusters so I can install the carrier.

^^^pulled from another thread

the 2 gray gromets up by where the tank mounts are the front mounts for the air box

 

[duneracerweston]

Ya im thinking switching to the raptor box would be better in the long run

Sorry i havent sent those pics this warrior has me pulling hair and fried something else electrical on the kfx at the track to day so its been a rough couple days


pics i have of the box

in this pic if you zoom you can see that the box is about .5-.75" taller then the plastics

 

['00 WO-YA!]

That looks real nice man. I guess the other question is will Warrior plastic fit if you try to make the Raptor style mounting work? I guess it would Prolly be best to make some lil 90* tabs & either have a welder tig em on or rivet or screw em. What filter is that Duner? Do ya have the part#?

 

[duneracerweston]

Umr4260 if I remember... its a um racing filter that they use in military of their site boxes

 

[89YFM_BEAST]

Iv never thought the air box could be modded cause here in ontario shops don't sell any aftermarket air boxes there dum say it already getting enough lol so is it hard to mount a raptor air box or just a few things I need to do to mount it I just did my motor an more air would be good