Banshee swing arm....

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

teamexileracing

Well-Known Member
Joined
Dec 5, 2006
Messages
2,622
Reaction score
0
Location
Right behind you!
arnt they the same as warriors? I know the shocks are the same and the axle is the same size but are the same width at here they go into the frame? I want to get a banshee swing arm...they are much cheaper.
 
Yeah, i'm pretty sure they bolt onto the frame exactly the same. You'll need a banshee carrier if you don't buy one that has a carrier with it though, and keep in mind also that a banshee swingarm is shorter than the stock warrior one. I don't know how much exactly, a couple inches I think. The only other issue I could see causing trouble is that the banshee's rear sprocket may be offset so that it lines up right with the front sprocket, so the whole carrier may actually be offset some.
 
illl call up my local yamaha shop...thanks for the help anyways....i hope they do because there are a tun of aftermarket banshee swingers for cheap on ebay.
 
well i was lookin at pics of banshee and warrior carriors and swingarms and they look the same. idk its just pics so idk they prob are not. But my shops are all closed. So i asked some people i know. Ill get back to yall.
 
Yes will bolt up, stock the banshee swinger is an inch shorter. you will need to use the banshee carrier and axle.
 
warrior and banshee axles are the same....so if i buy a aftermarket banshee swingarm everything will line up perfectly? Im mostly consernd about the sprockets lining up corectly becuase if they are off a little there gos my chain.
 
no i was going to order a custom swingarm w/ a round house design for a banshee off ebay i was going to get it as a +3 for like 300 so that would be a +2 for a warrior....they are cheaper and there are more of them thats why i wanted to know if everything lines up right.
 
Back
Top