Billet parts anyone???

[duneracerweston]

That is the 42 dollar question

 

[87warrior917]

See threw clutch cover.....Id def take one! as long as the price aint crazy

 

[duneracerweston]

I was just looking at stuff on ebay and saw this some needs to jumb on this

http://item.mobileweb.ebay.com/viewitem?itemId=400209062639&index=6&nav=WATCHING&nid=67818017662

 

[DeadLastRacing]

I was just looking at stuff on ebay and saw this some needs to jumb on this

http://item.mobileweb.ebay.com/viewitem?itemId=400209062639&index=6&nav=WATCHING&nid=67818017662

Not for $80. :tdown:

 

[hawkster0001]

the only problem i see is the clutch arm actuator thing

 

[duneracerweston]

Ya its going to have to have peaces of aluninum to reinforce it to the sides of the care

 

[hawkster0001]

it would be cool if you just cut like 6 triangle pieces of aluminum out so it had a spoke pattern

 

[elwood]

I was just looking at stuff on ebay and saw this some needs to jumb on this

http://item.mobileweb.ebay.com/viewitem?itemId=400209062639&index=6&nav=WATCHING&nid=67818017662

that is the same price my local dealer has them for

 

[elwood]

here is what I think might be the easiest way to make a clear clutch cover.

 

[duneracerweston]

here is what I think might be the easiest way to make a clear clutch cover.

The pproblem is. You can't just cand cover with plexy glass the clutch arm is onthe othe side of that dome and plexy glass dosent dome and making that arms container/guide strong enough not to push its self out of the cuver anf break the plexy blass cause then you would be screwed on the trail

 

[beastlywarrior228]

http://trinityracing.com/suzuki-ltr450.html

cut that out and have plexiglass go into the middle of machined billet aluminum that bolts to the cover. thatll give you plenty of strength

 

[beastlywarrior228]

http://trinityracing.com/yamaha-banshee-atv-side-cover-billet.html

 

[duneracerweston]

Not to be a downer but those are nothing like a warriors clutch cover the clutch lever is frome the otherside of the motor not the clutch cover like on a warrior

 

[beastlywarrior228]

no cut a hole smaller than what elwood showed and have something bolt on and cleanly go over where the clutch cover is

 

[duneracerweston]

It won't work like that have you ever had the clutch cuver off and looked at it? It won't work like that

 

[QuaDAddicT]

hey bro i am going to be workin up at the shop with cody in the summer so i may be able to help. i do have a super good hook up with the owner but ive seen what can be made and the possibilities are endless. i think its a good idea but idk how thay would feel if we were sellin stuff without cuting them some of the prophet u know. text me and we can talk about it more ok.

 

[hawkster0001]

what about some handle bar risers? a piec of aluminum that would be dreilled to fit the warrior stem and give you 2-5 more inches like the ones fro sleds?

http://cgi.ebay.com/ebaymotors/YAMA...11885403QQptZSnowmobileQ5fPartsQ5fAccessories

 

[duneracerweston]

Ya we will have to see

 

[hawkster0001]

what about a clear camshaft cover??

 

[duneracerweston]

That's easy just cut a peice of plexy the same size, silicone and stickit on