Bored to a 366?

[tyler]

Hey I was wondering if I got my warrior bored to a 366 with a wiseco piston kit would I have to have aftermarket cams or any thing else besides just getting it bored and putting the kit in? Thanks!

 

[beastlywarrior228]

no you dont have to but while its apart you might as well

 

[tyler]

Ya i wish i could but i dont really have the money...

 

[warriorgirl09]

it's nothing to pull the head back off and change the cam

 

[tyler]

how much would it cost?

 

[dave76]

it's nothing to pull the head back off and change the cam

Noo you don't have to pull the head off to change the cam, just the cam cover, chain tensioner, and all related componets involved.

I would put a good cam in as your increasing compression and will take waaay more advantage it. If your not looking to go crazy a web .390 or megacycle .415 are two nice choices, however even if you don't change the cam the stock valve springs need to go in the trash, they float with the stock cam and kill topend. Get a set of good RD or kibblewhite springs, I got the RDs. When I had my 366 I ran a megacycle 252X1 cam, actually still use that cam in my 446. It's a great cam, but you lose lowend power a bit with the 366.