I've been working on wiring up my buggy, using the Clymer manual as a guide. What I see on the wiring diagram (re: 97-01, page 412) is the red and white wire from the start switch going directly to the starter solenoid and bypassing the start circuit cut off relay. That relay's two brown wires (there are four) go to the dimmer switch. It doesn't make sense!
I've checked other diagrams (service manual, cyclepedia) and the red and white wire goes to the cut off relay.
Can someone with a '91 Warrior actually check this and let me know? Or someone that has wired one in the past? I think the Clymer manual is wrong.
I've checked other diagrams (service manual, cyclepedia) and the red and white wire goes to the cut off relay.
Can someone with a '91 Warrior actually check this and let me know? Or someone that has wired one in the past? I think the Clymer manual is wrong.
