Case Saver/Chain Roller

[sansabar]

After riding my rebuild for a couple of hours the chain broke and took a piece of the case with it. It may be too little too late but are there any case savers out there for the Warrior? I can't seem to find any. If not, will one from a Raptor work?

Should I have a chain roller with this ATV (97 Warrior). I bought it wrecked and trashed and no such part was on the machine. I need some educating.

As far as the chain goes, I had a new O-ring and don't understand why it broke. I would like to stay with an o-ring. Is there a recommended make?

 

[97warriorrider]

NOSS makes case savers for warrior

 

[missouritrailrider]

i cant seem to find it on their site......

 

[sansabar]

That's the first place I looked - didn't see them either.

 

[dave76]

Noss dosn't make em for a warrior anymore. If you call them mabe they'll be able to help you out.

http://www.nossmachine.com/yamaha_atv_parts.htm

 

[dave76]

GYT-R makes a sproket cover, but offers no case protection, but looks cool.

http://www.powerpartsplus.com/pages/catalogs/detail/26/205/405/20706/1/0/0/1/1/98/2676/0/front-sprocket-cover.aspx

 

[teamyardsale]

^^No way in hell im paying 60 bucks for it though. Theres billet polished ones for less than that.

 

[blubberbutt]

Noss dosn't make em for a warrior anymore. If you call them mabe they'll be able to help you out.

http://www.nossmachine.com/yamaha_atv_parts.htm

I'm gonna have to correct you on that ... here's an email that I received from them today:

From: David Noss <[email protected]>
To: Denny <@yahoo.com>
Sent: Tuesday, February 12, 2008 12:10:43 PM
Subject: Re: chain guard / case saver

Denny,

Yes, we have a case saver/chain guard for the Warrior. It is $65 + shipping.

Thanks,
David Noss

At 11:01 AM 2/12/2008, you wrote:
> Do you make a chain guard/case saver for a Yamaha Warrior?
>
> Any information that you could provide on this would be greatly appreciated.
>
> Thanks for your time,

 

[flyfloatr]

How much of the case did it take? How are you going to fix the case?

 

[dave76]

Glad to hear they still do offer it, they just don't have it listed anymore. Anyway it looks like this.

 

[sansabar]

It broke the fixed chain guard in three pieces and put a hole about 1/4 inch wide through the case behind the top mounting bolt. I'm going the JB Weld route for now and see how that works out. I ordered the case saver from Noss and hope I don't need to "use" it.

 

[redbonejoe]

I put a chain roller-tensioner from James Lucky on my warrior after a stick derailed my chain while backing up in a mud hole. Yea, broken case! Anyway it is a universal part and bolted up to my lower chain roller after I drilled it out. Never problem since. I JBwelded my case and it has worked for 4years and running.