Clutch arm removal

[deerman2701]

I'm trying to insall the new clutch parts for the raptor easy pu mod and I can't get that little arm off the pinion on the motor. Any tricks or tips?

 

[warriorkid23]

The one on the clutch cover? There is a little clip you just pop off with a screwdriver. Btw The clutch cable holder i ordered is on backorder from 2 different dealers. Where did you get yours?

 

[deerman2701]

I took the clip off and it doesnt wnna cone off and http://motorsportmonster.com/

 

[warriorkid23]

its probably rusted on there. Hit it with some wd or pb blaster it will come loose.

 

[warriorkid23]

I just ordered the cable holder from them hopefully they have it in stock.

 

[deerman2701]

Hopefully man. Hopefully they get you your order sooner than I go mine. Damn snow storm delayed everything.

 

[warriorkid23]

Hopefully man. Hopefully they get you your order sooner than I go mine. Damn snow storm delayed everything.

Lets hope, thats the only part keeping me from breaking in this new motor!!! Im dying to see what this thing has.

 

[deerman2701]

hey all i got it off, but i was wondering when i start my quad ingear with the clutch in the quad still moves a little bit like the clutch is still grabbing i tryed adjusting it for a while still no luck the old cable setup did that aswell what can this be?

 

[MotoArts]

Cold oil; viscosity too thick maybe?

 

[warriorkid23]

Something seems like its grabbing. Maybe if you re position the clutch arm back so it pulls more it might help.

 

[dirtrider73068]

Mine does this when it first started up, they say work the clutch lever in and out to get the clutch plates to let loose before putting it in gear helps. Its from the clutches sticking together form the cold oil, mine also will roll in reverse when it cold with the clutch pulled in, but stops when its warmed up.

If your still does this after its warmed up then your clutch still may need to be adjusted a little.