crankcase replacement

[Warriorrider20]

Hey guys about a year ago my chain poped and took a good chunk of casing away over chain. can I just disassembly the stator side and top end to take the left side of casing and not even touch the clutch.
Thanks in advance
ride on:atv:

 

[tcwes8]

use jb weld or jb putty or quicksteel and cover the hole up. both my warriors have a jb welded case

 

[Warriorrider20]

tried the jb weld after one ride fell off need to know if I need to touch the clutch side thanks

 

[duneracerweston]

There is two ways to do it
If you don't touch the clutch side you have to press the crank and main bearing out which is a pain. If you open the clutch side you have to pull the clutch and crank gears. Either way its a pain but I prefer pulling the clutch side apart its less stress on the crank.
Just my .02$ after you swap it you should get a case saver and solve the problem