durablue axle problem

nissan87man · Apr 5, 2010

Hi, I just joined this site recently and have a question. I have a durablue axle on my warrior. The problem is the hubs keep coming loose, I have big washer behind the axle hub nut because without it the axle nut does not tighten the hub to the axle tight enough. Should I get the stock hub washers? Am I missing a part to the axle? I bought this quad with axle already on it. Any pics would be helpful if I am missing a part to the axle. Thanks.

sidewayz · Apr 5, 2010

Welcome to the site . Do you have all the rite spacers on the axel ? Theres supposed to be a cotter pin through the end to keep it from backing off . You may have to mess with the thickness of the washers to bet it just rite .

DeadLastRacing · Apr 5, 2010

Post of a pic of your carrier and axle nut. It will help.

nissan87man · Apr 9, 2010

Left side

Right side

Left side

Right side

Right side axle nut. I have a big washer on both sides, because with out them I can't tighten the hubs. Sorry I could not resize last pic for some reason.

DeadLastRacing · Apr 11, 2010

Hummm, what the hell are those hubs off of? Deff not warrior hubs.

nissan87man · Apr 11, 2010

Not really sure? Hubs and axle were on the quad when I bought it. I bought the posi-lock nut so I know the axle is for a warrior.
I guess the hubs are off a different yamaha?I bought the rims for it because it had stock warrior rims. I just went on ebay and looked at warrior hubs. Mine look like the ones in this link
http://cgi.ebay.com/ebaymotors/2001-Yamaha-Warrior-YFM-350-Rear-Hubs_W0QQitemZ120450061652QQcmdZViewItemQQptZMotors_ATV_Parts_Accessories?hash=item1c0b621554

baddawg · Apr 11, 2010

They look the same as the ones on my 99 and 01

nissan87man · Apr 11, 2010

I thought they were warrior hubs. I don't have the 2+2 axle. Its the standard eliminator axle with one inch spacers. Durablue has two different eliminator axles listed for the warrior.