exhaust bolt size

[greevy12]

Does anybody know the size and pitch of the bolt that is used to hold the exhaust on? More specifically the bolt that is by the canister in the rear of the frame. Forgot to loctite and snow riding got the best of it. Thanks in advance for the help.

 

[dirtrider73068]

Its metric I can tell you that. Might look up in the manual and see if it has the size listed. I just looked up a parts list and it didn't list the size or pitch.

 

[MotoArts]

Looks like 6mm.
Don't use a bolt, get another stud and nut if they're bad.

 

[greevy12]

its suppose to be a stud? on the rear of the frame?

 

[greevy12]

after looking in the manual in the tutorials it appears to be a 8mm bolt. So I am going to assume it is a 8 x 1.25. It seems every other bolt is a 1.25 pitch. The 6mm seems to be the studs on the head.

 

[MotoArts]

after looking in the manual in the tutorials it appears to be a 8mm bolt. So I am going to assume it is a 8 x 1.25. It seems every other bolt is a 1.25 pitch. The 6mm seems to be the studs on the head.

My fault, sorry. Yes, head studs = 6mm