flywheel puller

[warrior87fun]

i looking to see if anyone has a used flywheel puller for the Yamaha warrior
before i go out and buy a new one thanks

 

[beastlywarrior228]

I have one 25 shipped

 

[Predator13]

If he don't take it I will let me know thanks Keith


Sent from my iPhone using Tapatalk

 

[Franken warrior]

A 35 mm X 1.5 spanner nut. Weld it to a piece of pipe. Take a large washer and weld it to the other end of the pipe. Now take a large nut and weld that to the washer. Get a bolt that fits the nut and you'll have one. I made one for 10 bucks. I know it sounds jakey, but I've used mine several times. I had in 1 day instead of waiting for shipment. Just a suggestion.

 

[Franken warrior]

Sorry. The nut should be on the inside. I'm going to post a pic on Facebook warrior page.

 

[infantryblues]

What is the name of this warrior page on the infamous facespace mybook...lol. I need a puller myself and am all for the home done tools like this as long as they work.

 

[warrior87fun]

thanks beastywarrior228 i found one my neighbor had one

 

[Franken warrior]

Yamaha warrior yfm350

 

[infantryblues]

Joined, name's cleatus on Facebook.

 

[beastlywarrior228]

Cool, I'm the admin on both groups

 

[infantryblues]

Right on. I just need to get my welder together and get it taken care of. Hopefully I'll be able to get it going this weekend. And I need to get my **** into the machine shop to have it bored so I can out my new piston set in. Speaking of, will I need to sleeve it if I'm going .060 for the piston?

 

[beastlywarrior228]

No, je sells a .080 over

 

[frit91]

A 35 mm X 1.5 spanner nut. Weld it to a piece of pipe. Take a large washer and weld it to the other end of the pipe. Now take a large nut and weld that to the washer. Get a bolt that fits the nut and you'll have one. I made one for 10 bucks. I know it sounds jakey, but I've used mine several times. I had in 1 day instead of waiting for shipment. Just a suggestion.

Nice! I thought i was the only one on here that made his own specialty tools. I have a Fastenal store about 8 miles from my house so I make my own **** on a regular basis.

 

[infantryblues]

Thanks, beastly. I picked up a namura .060 with rings and gasket kit. Just gotta get the machine work done and get it all back together. Gotta do a full valve job, too.

 

[infantryblues]

Where might I get a 35x1.5 nut, as local stores don't carry?

 

[Franken warrior]

I have a Fastnel hardware store in town also. You'll have to check with a local hardware store to see if they can order one or search online. If not, then purchase a puller.

 

[infantryblues]

Well damn, I have everything needed except that damn nut and none of the locals have it. I was hoping to not have to order anything, especially at the local shops, cuz I'm 30 minutes from town and that would be 2 trips.

 

[infantryblues]

Well...come to find out, we have a fatenal, stopped in there this morning and the guy told me they don't have a 35x1.5mm, nor can they order it as it is something they don't carry.

 

[Franken warrior]

Well that's just wrong. Sorry. Sounds like you better order the whole puller.

 

[infantryblues]

Yeah...I'm not in desperate need for it right now, but it's always good to have stuff just in case.