Frame year??

[1statv]

Mines a 2000 I'm going to swap parts on to new frame and ran Into a problem

Here's the bottom a-arm its not fitting snug like the top

Heres the top

Bottom of a-arm on new frame unknown year

Bottom of old frame 2000

Looks different and there are other minor parts that look different or not in the same location as the 2000 frame

 

[geeessfore]

Black one kind of looks like my old 1gen frame

 

[jeffsyfm350x]

Black one kind of looks like my old 1gen frame

It sure does!:iagree:

 

[1statv]

If it is a 1st gen what other problems would i have putting my 2000 parts on it ??? So far lower a-arm.Also I'm keeping the 1st gen swing arm on there.

 

[geeessfore]

Bumper placement, cdi location, headlight brackets

 

[jeffsyfm350x]

If it is a 1st gen what other problems would i have putting my 2000 parts on it ??? So far lower a-arm.Also I'm keeping the 1st gen swing arm on there.

If your keeping the first gen rear swinger its a inch longer to so your 2000 chain will be short too.

 

[bones]

also front hood mounts .... ps... i have any parts you need for that 1st gen frame

 

[1statv]

Just found out its a 87 fuckkkk me . So all I would need is 1st gen lower a-arm and a longer chain correct ????

 

[bones]

lowers and uppers

 

[1statv]

Will my carrier and axel bolt right up???

 

[bones]

iam pretty sure you'll have to drill out the mounting holes as the 2nd gens use 2 long bolts and the 1st gens use 4 short ones

 

[1statv]

So I need a 1st gen carrier as well?

 

[bones]

whats wrong with your 2nd gen swinger

 

[1statv]

Ha smart man ill just use that one . I wasnt thinking correctly just problem after problem over here lol thanks alot bones

So upper n lower a-arms that's all I need ??

What space is used to mount the CDI box on the 1st gen?? Would I need to splice wire and make it longer to fit new 1st gen CDI bracket??

 

[bones]

the cdi on a 1st gen mounts under the hood ... the 2000 is in the back ... but you can just mount it to the battery box support

 

[1statv]

Cool thanks alot fellas

 

[bones]

im 583 miles away ... clear some your pm's your inbox is full

 

[1statv]

Cleared

 

[1statv]

Anyone know if the stem off my 2009 will fit the 87??? And the gas tank as well??

 

[bones]

tank fits .... the 87 stem uses a bushing and 2000 uses a bearing .... but it might still work