a few months ago i had some wire problems which took me forever to figure out and fix. once i got the wiring all fixed and figured out the damn thing just wouldnt start. i took the carb off and cleaned it put a new spark plug in and then found a crack in the intake manifold between the carb and top end. i sealed the crack and put everything back together. still wouldnt start. carb is all adjusted to spec. checked the timing and it had jumped a link so i lined it back up and its probably stretched sinced it jumped so i need a new one. changed the oil and the seal on the drain plug broke off. fixed that with some jb weld. went to start it and the starter motor is burnt up so we pulled it around the neighborhood with my truck and got it to start but wont idle. and now the starter solenoid is bad and i might have a bad starter relay. i hate everything electrical so i was just gonna get a pull start conversion but i dont have any extra money for any of the parts i need. im pissed. the weather is getting nice and i havent been able to ride my quad in a few months