Hesitation when accelerating

[Borregowarrior]

Wow my warrior starts every time.Just one issue I wanted to pick everybody brains about. when i hit the gas i get hesitation but it goes away and takes off after i give it more gas.Now since i messed with carburetor so much i think it may be the mixture but is it too rich or too lean? i have the mixture turned out 1.5 turns i don't see how it could be rich. any ideas

 

[Borregowarrior]

Oh and by the way i rode 48 miles through the dessert on Sunday with no issues (well i didn't get towed home)

 

[dirtrider73068]

Does it happen right off idle or a little off idle? IF its a little off idle then its in the middle of the jetting which IIRC is the needle clip adjustment. Jetting can be hard and confusing, I read up alot of it buts its been a while since I last read on it.

 

[Borregowarrior]

do you mean that little eclip on the needle?

 

[dirtrider73068]

yes, have you messed with it?

 

[Borregowarrior]

yes but i put it back just where it was

 

[dirtrider73068]

Is there anything you done different than before when it run good?

 

[DeadLastRacing]

are you getting hesitation right off a quick accel. or even if you roll into it?

 

[Borregowarrior]

just quick acceleration if i roll it it works fine. I don't think i have done anything different

 

[dirtrider73068]

Pilot jet maybe? it could be block or something? Or maybe something got in there and is blocking a jet, it don't take much.

 

[Borregowarrior]

thanks!! I am taking it the glamis this weekend to stretch her legs