Im having an issue

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

87 warrior

Well-Known Member
Joined
Nov 7, 2010
Messages
163
Reaction score
0
Location
Renfrew,Ontario,Canada
When ever i come on to my throtle quick at all it dies on me.but if idle up slow it seems to run at high revs.does any one have any sugggestions.do i need to set my jets or something and if so i dont know where there are at.
 
I have no mods its all stock.my air filter is not too dirty.i did clean my carb it wasn't that dirty either.where abouts are the carb jets and what is the jet factory settings?The bike starts great idles great.sry it took me so long to reply
 
When you cleaned the carb did you install the accel pump wrong? Maybe try ungrading the spring for the accel pump with a Bic pen spring. it will make the throttle response a lil better.

I thing the stock jetting is 42.5 pilot, 145 main, 4th notch on the clip(not for sure), and 2 1/2 turns from flush on the pilot screw
 
so the pilot screw is right on the bottom of the carb.am i right.and the main jet in the bowl is snug.and the 42.5 pilot is snug.i had set the jet on the bottom of the carb at 1.5turns so that might be my problem.
 
Back
Top