Little Red Wire

[deerman2701]

Hey guys i was riding today and went to restart my quad but, dead nothing. so i messed with the ground and nothing. finally i took a look at the fuse to see if i popped it and doing so i saw that one side of the red wire broke off of the fuse holder, too close to even strip the wire and tape it together.

so my question is can i just buy the fuse holder and the wire or do i have to get a whole new solenoid and what not for my quad? or is there any tricks to maybe rig it to get more wire outta the fuse holder.

thanks!

 

[87warrior917]

Who can buy a whole new fuse holder with a regular 2 prong fuse in the same size at any auto parts store.

 

[DeadLastRacing]

you can go and get a new fuse holder and slice the whole thing into your harness in place of the old one. I did. I opted for the tooth fuse setup. Easier to buy/find those then the tube setup.

 

[deerman2701]

Cool sounds good. What size fuse do these take again?

 

[elwood]

I think 15amp and mine has been replaced with a blade fuse also

 

[deerman2701]

Update went to advance and picked up a nice new fuse holder and some bullet head connecters and got a couple 10 amp fuses and went for a nice 2 hour ride and no problems! thanks everyone!!!

when we going to wellsville >! haha