Motor stalls when throttle is engaged

[Nick_fb46]

Hi, I'm new to the forum. I just picked up my warrior from a friends house where it was sitting for nearly a year. I initially had some electrical issues; including the starter solenoid, main fuse and the battery. Today, I was able to get it running. It would stall once I gave it some throttle, so I pulled the carb and cleaned the main jet. This didn't help at all. I tried adjusting the fuel mixture screw as well as the idle screw. These helped the idle quality a bit, but not the throttle. I'm thinking:
-bad fuel filter
-bad fuel
-spark plug

Does anyone have any other ideas? are there any other components in the carb that would cause this? I don't really know too much about them.
Thanks in advance for your help.

 

[Gen1Pat]

Check your intake manifold for cracks.

 

[fknboss]

Even if you don't see cracks. Mine was leaking at where the mounting bolts to the head are. It ripped the rubber sacked tons of air.

 

[01warriorrocker]

Air to fuel mixture could be mixed up to it 1-1/4 turns out my warrior was doing the same thing and also the exhaust manifold may be loose