My BUILT 01 warrior 350 I set up for MX

[evanragon131]

My BUILT 01 yamaha warrior 350 I set up for racing in the Miami/Mesa MX race series

What do you think of my build? And yes those are 2014 KFX450R front shocks

 

[evanragon131]

More pics

My BUILT 01 yamaha warrior 350 I set up for racing in the Miami/Mesa MX race series

More pics of my warrior

 

[evanragon131]

More pics of my warrior

More pics of my warrior

More pics of my warrior

 

[Warrior1996]

Cool pics, the quad looks real nice.

 

[evanragon131]

Cool pics, the quad looks real nice.

Thanks man, spent a while on it, it was complete stock when I got it in showroom condition

 

[Warrior1996]

Do you have a full mod list on what's done to it? You should start a build thread if you plan to mod it more.

 

[evanragon131]

Do you have a full mod list on what's done to it? You should start a build thread if you plan to mod it more.

nah I didn't really write it all down but I'll say all I remember, it's a 01 warrior 350 with a Motosport products nerf bars, ITP rear offset rims, diamond j customs widening and shock relocation kit, custom fabricated shock widening mounts, 2014 KFX450R front shocks, custom front and rear numberplate mounts, sparks racing baffle, except on race day I run no baffle, Maxxis RAZR rear tires, TECH 4 front tires, RENTHAL chain and sprocket kit, UNI filter, Hammerhead direct shift shifter with no linkage (HIGHLY RECCOMENDED), and there's a few more I can't thinking top of my head, but if u don't have the Hammerhead shifter I highly reccomend it

 

[evanragon131]

Do you have a full mod list on what's done to it? You should start a build thread if you plan to mod it more.

Oh and the rear width is 48" wide, and the front width is 47.5" wide

 

[Warrior1996]

Sweet, sounds like a nice parts list. I have a lot of similar parts on my quad. Give my build thread a look if you want. Link: http://www.yfm350.com/forums/showthread.php?t=30216

 

[evanragon131]

Sweet, sounds like a nice parts list. I have a lot of similar parts on my quad. Give my build thread a look if you want. Link: http://www.yfm350.com/forums/showthread.php?t=30216

Looks good, do u race it? people think they don't jump good but I raced my z400, And my buddies kfx450r and my warrior handles the best out of all in the air it's just the landing that beats u up a little more, I used to jump it 10ft high when it was stock, but now I've actually taken it about 16ft high before after changing my front shocks to the ones off a kFX450R

 

[Warrior1996]

I plan to race XC eventually, but I do ride on ORV trails a lot. I prefer the trail riding/racing over motocross style. My front shocks a too soft to launch it very high. If I got a set of 450 front shocks then I could jump it higher. Duneracerweston has a really nice motocross setup warrior, look up his build thread, you'll like it.

 

[evanragon131]

I plan to race XC eventually, but I do ride on ORV trails a lot. I prefer the trail riding/racing over motocross style. My front shocks a too soft to launch it very high. If I got a set of 450 front shocks then I could jump it higher. Duneracerweston has a really nice motocross setup warrior, look up his build thread, you'll like it.

Ya 450 shocks did ALOT for me so much better handling, and on landings, I prefer trails more then motocross really but it's 3 hours away for me to trail ride vs 40 min to the mx track

 

[Warrior1996]

It's like 3 hours for me to the closest trails too, but we have some short trails around where we live too. I don't even know where the closest mx track is haha.

 

[duneracerweston]

Its nice to see I'm not the only one riding mx on a warrior.

A few things though. You really need to look into a 01 660 raptor rear shock, and a propper long travel front suspension. That will help a lot. Also a wider axle like a gforce that won't bend would be a good investment. That stock one will bend.

 

[JCDigital]

Me too bro. I'm part of the MAD RACERS Running MX on a Warrior.

Complete Project HERE:
http://www.yfm350.com/forums/showthread.php?t=30709


-WARRIOR 350- to -VELOCIRAPTOR 450::
------------------------------------------------------

MOD LIST::
>Big Bear OIL Cooler MOD
>SUZUKI DRZ400 Direct Shifter,
>Tusk Handlebar Riser 30mm + hand made 36mm Riser,
>ProTaper Handlebar Grips & Handlebar,
>Powermadd Star Handguards,
>Outlaw Billet Fuel Cap,
>Tusk Clutch Cable,
>Tusk CLUTCH Kit + Heavy Duty Springs,
>Moose Racing EZ3 Shorty Clutch Lever Assembly,
>Tusk 36" Rear Brake Line,
>KFX 450 16.5 Front Shocks,
>Raptor 660 Rear Shock,
>BANSHEE Rear Shock Linkage,
>SUZUKI 400z +2 +1 Modded A-Arms,
>Custom Pro Armor Nerfbars & Heelguards,
>Raptor 660 Foot Pegs,
>D.I.D Timing Chain,
>D.I.D X Gold-Ring Chain,
>Clear ACRYLIC Air Box,
>Cold Air Filter INTAKE,
>K&N Air Filter,
>12 Tooth Front Sprocket,
>Hot Rods Bottom End Crankshaft Kit,
>WISECO 11:1 High Compression Piston,
>Hotcams Stage 1 CAM,
>Ported & Polish ENGINE,
>Valve JOB Done,
>Black Box HIGH PERFORMANCE CDI,
>Fox PERFORMANCE Race Coil,
>BRISK Racing Spark Plug,
>YFZ 450 HeadLights,
>Rebuilded Yoshimura PIPE,
>YFZ 450 Radiator Scoop Fenders,
>YFZ Front Hood Fender,
>Raptor 350 Fenders,
>Raptor Fenders Shaved alike YFZ 450,
>Raptor 350 Fuel Tank,
>Raptor 350 Seat & Seat Cover,
>Custom Flip Over Rear Frame & Seat,
>Custom HandMade Case Saver,
>Front LED DayLight Running MOD,
>Raptor 660 i-MX Rool Design IMS front bumper,
>PRO ARMOR Tether Safety KillSwitch,
>+4 Swingarm/3in REAR Wheel Spacers,

http://www.yfm350.com/forums/showthread.php?t=30709

::JCDigital::

 

[JCDigital]

Great Warrior Bro i will love to see some videos of your machine! Maybe some Air.
Who said a Warrior can jump!
Looking forward for the vids.

 

[JCDigital]

More pics of my warrior

Great Air buddy! :tup:
Looking forward to see some vids man!

 

[Beastmode17]

NICE!!! Looking good, Overall solid mods. I like the look of it

 

[Motomike]

Yooo


Sent from my iPhone using Tapatalk

 

[Motomike]

Evan I know you from Instagram what's up!


Sent from my iPhone using Tapatalk