Need oil cooler help

[bryankbeane]

Wanting to put an oil cooler on the raptor need some pics of it and were to get fitting and were to put the holes for the lines thanks

 

[MotoArts]

Good reading:
http://www.yfm350.com/forums/showthread.php?t=15037

 

[duneracerweston]

well there is 2 ways you can do it you can drill tap holes in the clutch cover or do it the bolt on way and get a big bear 350 oil filter cover and cover adaptor off ebay and then just plumb it to your cool it mostly depends on your prefference http://cgi.ebay.com/ebaymotors/OIL-...374215QQptZMotorsQ5fATVQ5fPartsQ5fAccessories you would need these peaces to do the conversion plus the longer blts an fitting http://cgi.ebay.com/ebaymotors/OIL-...221199QQptZMotorsQ5fATVQ5fPartsQ5fAccessories you can find them cheaper if you cal a atv junk yard or wait and watch ebay

 

[1998yamahawarrior]

Ive got pics of the clutch cover one that I just did. If ya wanna see them Ill post them up. If you do the fittings are avaliable at lowes or menards. They are just brass fittings, unless you want to go an fittings.