oil cooler

[357warrior]

i had a clutch cover oil cooler mod done to my motor before it blew up and the cooler was getting warm. i took the lines off and oil just poured out while it was runnin. now that i did the stroker its not getting warm at all. i took the lines off and barely comes out with it runnin. any 1 know what might be wrong with it

 

[starpuss]

oil lines pluged. or oil pump is bad. DO NOT RUN the quad till you get it fixed.

i picked one up that bad a blowen rod. and trust me. the chunks & junk will plug all the ports

http://www.youtube.com/watch?v=JIMjwuO3mO0&feature=player_embedded

thats what mine looked like lol...

 

[357warrior]

thanx it was the oil pump. i took it out and tried spinning it it would go loose and then tighten up pretty tight. i put another 1 in and its runnin fine now