oil nut

[dazzo16]

Just decided that i was going to change my clutch plates. Started with the oil nut and failed. had a 19mm on the oil nut and it wouldnt come of let alone fit on right. And i think i ****** stripped it. any ideas or tips on taking that sucker off?

 

[duneracerweston]

Next smaller size in sae sizing sockets and hammer it on and use a rachet and try that

 

[dazzo16]

alright i think ill try that tommrow. i started it tonight when it was dark so bad idea in general. ill try and get an 18mm on there and hammer it good. thanks

 

[duneracerweston]

I don't think a metric 18mm will work id try 5/8 or so I may be off

 

[dazzo16]

ok well w.e ill see what i can do thanks for the input tho

 

[3504life]

Hammer chisel Worked for me

 

[DeadLastRacing]

^Yupp. chisel it off. Repalce with a new one.

 

[dazzo16]

hopefully i can get it off lol. ill have my uncle help me if i cant well figure it out.

 

[deerman2701]

+1 for chisel and hammer.

i just had to do this method on a stuck and stripped drain plug. came right off

 

[jgray44]

i took a dremel and cut 2 slits at the 9 o clock and 3 o clock on the outer ring, then used a screwdrive and hammer to beat it around