i hadan old dg supertrapp exhaust laying around and i decided to throw in on the warrior becaus it had cobra that was wayyyy to loud on it. i can hear something rattle in the exhaust and i was wondering if there is a way to pul the guts out and fix whateve is rattling
old dg supertrapp
- Thread starter jgray44
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
1998yamahawarrior
Well-Known Member
Check the bolts that hold the disc's on, thats the same pipe Red headed step-child has on it. Also rappy, I dont think hes talking about gutting it, but pulling it apart for repacking and seeing what the rattle was. Unfortainly man, Ive never tryed to see if you can pull these apart. I should look into that myself.
duneracerweston
Well-Known Member
Take the trap off and see if it goes away and if it dose then the supper trap tlates are loose or worn
Ok I'm over the rattle. But I just went to adjust my valves, the exhaust was in spec and the intake was .12 over spec! Needless to say that it doesn't tick anymore 
. Now that it's back into spec, I'm assuming it's getting more air into the cylinder is this going lean up the plug? It's was pretty rich before
. Now that it's back into spec, I'm assuming it's getting more air into the cylinder is this going lean up the plug? It's was pretty rich before
duneracerweston
Well-Known Member
Id should ride it and see
