THORrider05
Well-Known Member
Does anyone have a pit bike? If so what do you have and whats done to it?
Ill start with my money pit
Started life as a 2004 Honda CRF70
First mods-
-Uni pod filter
-Hyper CDI
-Pro Taper xr50 bars
-honda civic/accord bumpstop in rear shock
- Lots of tubes and tires replaced
-Broke the rear frame off so i braced that
-cut front/ rear fenders
-ported intake
Then I fried the piston to the rod and it sat for a few years,got a white brothers r4 exhaust super cheap, bought a bbr 88cc kit to find out i needed an xr/crf 50 head for it to work right so i sold it and made some $$ from it(helps when i get discounts haha).Then a few more years went by and i decided to get it running again.
Second mods-
-SSR Motorsports 125cc engine w/4spd
-Installed White Brothers R4 exhaust
-Skidplate(finally)
-BBR HD Pegmount
-Braced the frame
-ported the stock crf70 carb
rode it for a few months then started on the suspension
-BBR front fork springs w/ 15w fork oil
-I-Shock rear shock
-+4 xr/crf 50 rear swinger (+2 for the 70)
-New skidplate (destroyed the first one)
-chain roller
-Custom lower rod end for the rear shock after it broke(more travel and works better)
-High compression piston
-XR80 cdi (hyper cdi died)
Then the trans went out and now I just started on it again
Third Mods-
- SSR Motorsports 125cc w/4spd
-Mikuni 26mm carb
-custom adapter i made for carb
-Cradle frame brace
-Another new skidplate
-New performance coil
-New CDI (BLUE)
-15T front sprocket
Im sure im forgetting something.
Ill start with my money pit
Started life as a 2004 Honda CRF70
First mods-
-Uni pod filter
-Hyper CDI
-Pro Taper xr50 bars
-honda civic/accord bumpstop in rear shock
- Lots of tubes and tires replaced
-Broke the rear frame off so i braced that
-cut front/ rear fenders
-ported intake
Then I fried the piston to the rod and it sat for a few years,got a white brothers r4 exhaust super cheap, bought a bbr 88cc kit to find out i needed an xr/crf 50 head for it to work right so i sold it and made some $$ from it(helps when i get discounts haha).Then a few more years went by and i decided to get it running again.
Second mods-
-SSR Motorsports 125cc engine w/4spd
-Installed White Brothers R4 exhaust
-Skidplate(finally)
-BBR HD Pegmount
-Braced the frame
-ported the stock crf70 carb
rode it for a few months then started on the suspension
-BBR front fork springs w/ 15w fork oil
-I-Shock rear shock
-+4 xr/crf 50 rear swinger (+2 for the 70)
-New skidplate (destroyed the first one)
-chain roller
-Custom lower rod end for the rear shock after it broke(more travel and works better)
-High compression piston
-XR80 cdi (hyper cdi died)
Then the trans went out and now I just started on it again
Third Mods-
- SSR Motorsports 125cc w/4spd
-Mikuni 26mm carb
-custom adapter i made for carb
-Cradle frame brace
-Another new skidplate
-New performance coil
-New CDI (BLUE)
-15T front sprocket
Im sure im forgetting something.