'00 WO-YA!
Well-Known Member
- Joined
- Aug 29, 2011
- Messages
- 2,471
- Reaction score
- 3
Correct, that's TDC (TOP DEAD CENTER)
Setting Timing
- Thread starter mopar1
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
dodgewarrior
Well-Known Member
K well I'm sure I'm 180 out then dang lol thanks
Rhyno
Well-Known Member
- Joined
- Mar 27, 2012
- Messages
- 152
- Reaction score
- 0
Has anybody tried advancing the ignition timing by mechanical means?
-Rhyno
-Rhyno
The vitos key i guess does that
Gen1Pat
Well-Known Member
The vito's key is the only way.
Gen1Pat
Well-Known Member
Unless you can come up with an adjustable stator.
Rhyno
Well-Known Member
- Joined
- Mar 27, 2012
- Messages
- 152
- Reaction score
- 0
We're all thinking alike. Thanks for the replies. Just curious if anybody had done it.
-Rhyno
-Rhyno
Last edited:
yamaha freak
Well-Known Member
timing chain rail
hey guys i have been working on my father inlaws firstgen. needed a head gasket the book dosnt show the timing chain rail where it sits ? If you are on the left of the bike facing the cam the rail on the left . dose it go in to the head or is it tight to the cam chain and gear?
hey guys i have been working on my father inlaws firstgen. needed a head gasket the book dosnt show the timing chain rail where it sits ? If you are on the left of the bike facing the cam the rail on the left . dose it go in to the head or is it tight to the cam chain and gear?
Gen1Pat
Well-Known Member
It has a saddle in the bottom of the engine that it sits in, and it has another in the bottom of the head that it goes in. You'll see it plan as day if you turn the head over. Also, with the head off, you can look down through the timing chain passageway and see the lower saddle for the guide.
