Small engine EFI..

[Mathius]

So I thought I would post the link to these EFI kits. The complete kit is around $600 bucks...
The 38mm throttle body would work best with the wardog IMO. They also make flange mounted throttle bodies, check them out...
http://www.ecotrons.com/400cc_to_800cc_Engine_EFI_kit.html

 

[88WarriorBoy]

oh yeah a boosted wardog with EFI:evilface:

 

[96yamahawarrior]

^someone should do that!

 

[Mathius]

oh yeah a boosted wardog with EFI:evilface:

Did you see this on the ecotrons page? They make it specifically for the turbo EFI kit.
http://www.ecotrons.com/Small_Engine_RHB31_VZ21_turbocharger.html

 

[Mathius]

FYI.. This ain't po' boy stuff.. It would set you back a $1000 easy to turbo your machine.
(I thought I should add that, seeing as this is in the "web deals" section)

 

[1999yamahawarrior]

I think Efi would be cool. It would start a lot easier in cold weather.

 

[Mathius]

I think Efi would be cool. It would start a lot easier in cold weather.

Not only that, but I read that it can increase power threw out the RPM range. It's the same concept as a "dial-a-jet".
The FI helps clean up lean/fat spots, and also helps with severe altitude changes. (No more swapping jets) :tup:

I read this article about EFI on 2 strokes as well, and it blew my mind!!
A fuel injected 2 stroke is more efficient, produces less emissions, and twice the power of a 4 stroke of the same displacement.. Go figure. lol

 

[96yamahawarrior]

evinrude made a 2 stroke boat motor with fuel injection that was more efficient than all the four strokes i think they call it e-tec

 

[duneracerweston]

man.... i wish i had found this kit a couple years back! i have tomuch wrapped up in carbs to switch to efi now!:argh:

 

[Mathius]

I would love to see this put into a decent project..
I know that if I ever figure out this 12 volt conversion, I'm definitely going EFI on the 490!!!

 

[96yamahawarrior]

I'm definitely going EFI on the 490!!!

Do it dude! That would be sick!

 

[88WarriorBoy]

Man efi would save evryone the headaches of carb tuning

 

[Gen1Pat]

So... I just read this. How jelous would everyone be if I put this on my stroker this winter?

 

[duneracerweston]

So... I just read this. How jelous would everyone be if I put this on my stroker this winter?

depends what it pulles on the dyno!

 

[Mathius]

depends what it pulles on the dyno!

Fo shore...
The numbers are the only thing holding most people back...

I bet there would be a noticeable gain though. :tup:

 

[duneracerweston]

if it bust 45 hp i will order one the ext day if mine dont busts 40 with this fcr

 

[Mathius]

So I got to thinking (it can be dangerous sometimes).
Why don't I contact Ecotrons, and ask them if a kit hasn't been used on a Warrior already?
If not why not contact admin on the site, and see if they couldn't gain some sponsorship (advertising) from the site????
I bet someone on here would give their left nut for a turbo wardog....

 

[88WarriorBoy]

Efi would be amazing though

 

[duneracerweston]

been doing research,, here is what i found.

http://www.ninjette.org/forums/showthread.php?t=103371
http://www.ninjette.org/forums/showthread.php?t=96973&highlight=efi+install

im also going to email the guy and get some addictional info on the kits.

 

[Mathius]

been doing research,, here is what i found.

http://www.ninjette.org/forums/showthread.php?t=103371
http://www.ninjette.org/forums/showthread.php?t=96973&highlight=efi+install

im also going to email the guy and get some addictional info on the kits.

Thats some good research right there. The dual TB looks awesome.

I was about half cut when I cracked off about contacting them the other night. lol
But I did contact them earlier this spring about the 2 stroke kits they have.
Their very helpful, and willing to work with you to set up the perfect kit for your machine.

I would love to see someone try this.. I bet they wouldn't be disappointed.