some carb probs

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hawkster0001

Well-Known Member
Joined
Apr 15, 2010
Messages
681
Reaction score
0
so i finshed the whole oil cooler mod and my quad starte right up, and i didnt know exactly how much oil to pu it so i was folling around getting that rgih, then when i started it i was giving it some as to get the oil flowing to see if there was any leaks (there wasnt) and it just quit all of a sudden, it had done this before, so i poped out the carb opened er up and evrthing looked fine, so i just flipped around the little orange piece at the bottom of the main jet put it back together and it started, and ran, then ust quit again and did the thing where it would just fire once when i pull it . whadddaya think? :-/ maybe my main jet is becoming clogged?
 
stator... main jet has NOTHING to do with starting unless you are starting it at WOT.... i would say your source coil is going to measure above spec on ohms... check it and see...
 
so youw saying i have a spark problem? (i dont use electric start, pull start only if that makes a diff) i saw somwhere in the problems section about ohms, and exactly what should i meausure? the output of the coil
 
Back
Top