spark plug mods

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yfmdeuce

Active Member
Joined
Sep 21, 2009
Messages
38
Reaction score
0
I have read about a few different plug mods for power gain. Like indexing the plug to the exhaust valve. Or side gaping the plug and using a hotter (or colder) plug. Has anyone tried any of these with any noticable power gains. I figured it wouldn't be enough too mess with doing. Oh. Just thought of anouther one, the E-3 diamond plug. What is your thoughts on this?
 
I run a E3 plug and hot dog I love it it pepped up quite a bit the only draw back is they are 12 bucks a peice!! The plug number for E3 for the warrior is E3.36 and it actualy goes to a harley sportster
 
indexing the plug, I've been told you want the open end inbetween the two vavles. Most are close, just mark the plug with a marker so it lines up with the open end of the gap tighten it down and see where it sets. If it's off indexing washers are pretty cheap but it should be close
 

Latest posts

Back
Top