Suggestions for widening front track?
- Thread starter leepic
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
I ordered a set of Full Flight +2 arms the other day. Their website states that the stock brake lines are long enough. Has anyone installed +2 arms w/o replacing the lines? Any tricks I should look out for?
To match widening the front, should I flip the rear wheels or install spacers?
To match widening the front, should I flip the rear wheels or install spacers?
DeadLastRacing
Well-Known Member
yeah, they will work. Just take them out of the stock clamp location on the frame, and bend the metal out a little more on each side.
Stock front lines are metal out of the splitter for a few inches, then go to rubber.
Stock front lines are metal out of the splitter for a few inches, then go to rubber.
JonS
Well-Known Member
i wouldn't skip doing the +2 lines either. you already shelled out for the new arms so why not.
I got the arms last night and pulled them out of the box to inspect them. I noticed the shock mounts on the lower arms a bit off center making a distinctive right and left side arm. When the shock is bolted to the lower arm, is it closer to the leading edge of the arm, or the trailing edge? The oem arms have it closer to the leading edge, but the decals on the new arms would have you install them closer to the trailing edge...
hno:
hno:
DeadLastRacing
Well-Known Member
Could be trailing edge on the new arms. Are they +2, +1's by chance? That second + is the amount moved forward. Anyways, they need to mount so as the shock is stright up and down, from shock mount to arm mount, how ever way that me be on your new arms. Some idiot coulda put the stickers on the wrong side, I kinda doubt it though.
