Trailer build

[mudbogginsouthernboy]

Would this work so I could fit 2 quads on it?

 

[alex456123]

yep!

 

[mudbogginsouthernboy]

Lol it's gonna be a lot of wood. My name is Alex too

 

[alex456123]

well god damn! GTFO theres only room for one on us in this town! lol

 

[Rockgrenade]

You MIGHT have to build up and over the wheel wells to fit the quads. It doesn't look like the wells are that high off the deck, (without measurements I wouldn't know). Mine is over the wheel wells on 2x6 boards that have plywood sheating. But that drawing is on the right track.

 

[mudbogginsouthernboy]

How could I get it over the wheel wells

 

[Rockgrenade]

Lol it's gonna be a lot of wood. My name is Alex too

It's gonna cost more in fasteners and other misc hardware than wood. Just how it goes..

 

[Rockgrenade]

How could I get it over the wheel wells

Well, if there's enough room to build around them then your fine. IF NOT, measure from the frame of the deck to about 1" above the wheel well. That will be the height of the framing you'll have to use to make the entire deck level. But measure first, you might not have to do this.

 

[mudbogginsouthernboy]

Okay idk how I'm gonna do it but ill figure something out

 

[alex456123]

im gunna make a full blueprint hold on. NO CHARGE! lol mesurements of trailer?

 

[mudbogginsouthernboy]

the trailer is 47in wide by 92in long

 

[Rockgrenade]

Damn, and I just drafted up a hand sketch...

 

[mudbogginsouthernboy]

What lol?

 

[alex456123]

not blueprints but picture with mesurements: (blueprints)

 

[mudbogginsouthernboy]

So I need too lay boards side ways instead of long ways

 

[Rockgrenade]

That's what I was figuring too, but I was also suggesting if he were to raise the new deck to clear the wheel wells, (I had to do that with mine so my quads would park flat anywhere on the 6 x 8 trailer I have)

 

[alex456123]

So I need too lay boards side ways instead of long ways

i think it would hold better.

 

[mudbogginsouthernboy]

How would I bolt the boards down by the finder well

 

[Rockgrenade]

It would, but your going to need something better than flat-laid 2x6 boards if your hanging them off 2' each side farther than the original frame. Maybe stand them up good-ole framing style and sheet it with plywood?

 

[alex456123]

It would, but your going to need something better than flat-laid 2x6 boards if your hanging them off 2' each side farther than the original frame. Maybe stand them up good-ole framing style and sheet it with plywood?

YES yes and yes that is a VERY good idea!