Tusk brake pads?

[tyler]

Hey does anyone know if these brakes pads are any good? Thanks!

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=2966&listingId=&custPropAttr1=62#vehicleSelect

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=2947&listingId=&custPropAttr1=62#vehicleSelect

 

[kyler]

they SUCK!!! about hour of really hard riding and they are toast.... pretty much use for one ride and have to change...IF THEY LAST THE WHOLE RIDE!!!! at least thats how the carbon ones are

 

[tyler]

Alright thanks i just wanted a second opinion. i think im going to go with EBC

 

[baddawg]

I tried a set of Tusk on the back and a set of Neutron on the front this spring.
After six months and not many hours the Tusk are just about wore out and the
fronts still look new.

 

[DeadLastRacing]

EBC is always the way to go when it comes to the brakes.

 

[tyler]

Alright which ones should i prolly get (im on a budget, but i dont want ****)

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=4421&listingId=&custPropAttr1=62#vehicleSelect

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=4462&listingId=&custPropAttr1=62&sizeAttr=#vehicleSelect

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=4442&listingId=&custPropAttr1=62#vehicleSelect

http://www.rockymountainatv.com/productDetail.do?&navType=type&webTypeId=31&navTitle=Brakes&webCatId=15&prodFamilyId=4504#vehicleSelect

 

[yamarider]

Get EBC Severe Duty pads if you can afford them, they'll probably be the last set you ever buy. If they're too steep you can go with the carbon, or sintered metal if you ride in mud and water. I've tried saving money with the cheap brands and no-name **** on ebay enough times to have learned by now that you end up saving money in the long run buying from a good name brand. EBC, Galfer, Braking, Vesrah are all good ones if you can find them.

I've had the same experience as others with the Tusk pads as well as most of the other cheap ones, took less than an hour of MX before I had steel on steel contact again.

 

[tyler]

^You said to go with the sintered metal if I ride in mud and water, and I do. So are these the ones i need to go with?

http://www.rockymountainatv.com/productDetail.do?navTitle=Brakes&webCatId=15&navType=type&webTypeId=31&prodFamilyId=4442&listingId=&custPropAttr1=62#vehicleSelect

 

[tyler]

But i also found these they are sintered metal also just made by Renthal.