valve springs ????

[serento]

so i have a 09 raptor, so far i have a full yosh. with yosh headers, pro design air filter with pro tec lid ,gytr jet kit, stage 1 hotcam,dynatek cdi box and a je 12:1 high comp. pistion, i was seeing if i should buy a kibblewhite valve spring kit or just stick to my stock springs... thank you guys for all of the info

 

[duneracerweston]

the spring themselfs aint gonna help much but p&p camed and oversized valves with springs thats when things get really interesting

btw how much and were did you get those trail tech leds?

 

[kyler]

i would get the heavy duty springs cause i know warriors dont have rev limiters and you will float the valves and the heavy dudy spring help to prevent this,,,,

 

[87warrior917]

Having valve float is no good also. Like kyler said it will prevent this if the stiffer srpings are used

 

[DeadLastRacing]

I doubt you'll float your valves on a stage 1 cam, but, that being said, with the higher comp. and the dynatech box, your be playin it safe with stiffer springs.

 

[kyler]

i've floated them with stock cam with stock springs,,, and also floated them with .440 lift web cam and kibblewhite springs,,,

 

[DeadLastRacing]

well yeah its possible, these quads have no rev limiter so floating them is easier then it should be.

 

[duneracerweston]

thats needles to say if you try hard enough you can float any valve/spring/cam combo it just depends on how you ride it