Warrior Engine Rebuild...

[dreded]

Well this past weekend I was riding the warrior and suddenly it shuts off... I tried to start it again seemed to turn over ok but wouldn't run for more than a second or two, got it back to the truck and checked the oil and its bone dry turns out the Oil drain plug is hollow and hit a rock and all the oil drained out

So I have yet to fix the issue with the plug and I assume I need to do a rebuild which I was kinda planning on doing anyhow.. but my question is since im going to be doing a complete rebuild is there anything I should do while Im at it?

And does anyone know of a good top and bottom end kit the more complete the better to make this process easier? Cost isnt a factor over quality

 

[buzzy613]

I would deffinatly check all the bearings. especaly the crank

 

[bones]

well if Cost isnt a factor i'd say stroke it or 366 kit

 

[dreded]

well if Cost isnt a factor i'd say stroke it or 366 kit

who makes the 366 kit?

 

[bones]

http://cgi.ebay.ca/366cc-10-5-1-Big...Accessories&hash=item3eeed51fb6#ht_1567wt_698

but i'll have to have a shop bore your jug .80 over

 

[dreded]

http://cgi.ebay.ca/366cc-10-5-1-Big...Accessories&hash=item3eeed51fb6#ht_1567wt_698

but i'll have to have a shop bore your jug .80 over

just so you know I already found that kit for $175 at www.vitosperformance.com thanx for the link though, it let me know what to search for

 

[bones]

yeah ...i just already had ebay open

 

[bones]

the JE sit has it for 167.13

 

[duneracerweston]

If woy get a crank STAY AWAY FROM WISECO CRANKS THEY ARE **** that is all