Warrior Mod: Need some Ideas !!

[wvfishman]

Hello,, i have a 02 stock warrior and want to make it more snapper on take off. I just bought a FMF slip pipe. (POWERCORE 4) and Jet Kit.. Will be putting that on this week.
Here is the Jetting Information that FMF:Recommends.
Main Jet: 150-152
Pilot Jet: 42.5
Needle: STOCK
Needle Position: 3RD
Power Jet: N/A
Air Screw: N/A
Fuel Screw: 1.5

So going to try the 150 on main jet. but rest is stock i think, so i dont think this will make it quicker..

What other easy mods can i make to make it quicker on take off?

also i bigger tires on it.. 25x11x9..

Thanks Again.

 

[sidewayz]

SPROCKETS !

 

[2000warrior350]

with those 25's you've taken all your take off away .. u need to go down to a 13 or 12 tooth front sprocket if you gonna keep runnin those big honkers

 

[missouritrailrider]

fuel screw 1.5?? whats that

 

[2000warrior350]

its a the little brass "flat head screw" its on the bottom of the carb, on the "front side" <the side that is closest to you motor .......just in front of the bowl

you can see it without taken the bowl off

run it all the way in ,,, then keep track of your turns and turn it 1.5 if thats what ur directions say

 

[missouritrailrider]

oh 1.5 seems lean to me.........

 

[geeessfore]

Ya get a 12t front. You will love it with those tires