warrior wont start need help 3 shops already no go

[jimsplans1]

i got bought a warrior from my buddy and it wont start new stator/cdi timing is set valves are adjusted to intake=.08 exhaust= .18 there is spark fuel and timing something is still off can anybody help me

 

[1998yamahawarrior]

First things first, where did you get your cdi and stator from? Have you went over your wiring harness? Have you tested your coil? Have you cleaned and checked all grounds? Checked all connections period? Just a few ?? to start.

 

[jimsplans1]

ok stater and cdi were bought before i got it but i know the stator is from sullys in vegas im getting lots of spark ive searched and search for issuse in the wiring i just got it back from the shop so im not sure what they have tried

 

[jimsplans1]

it kinda burps out the carb at about 90 degrees before t.d.c.

 

[jimsplans1]

the valves were intake .03 exhaust .06 compression 127

 

[jimsplans1]

im not very good at working on bikes trying to learn as i go

 

[duneracerweston]

Maybe jets are off? Any mods on the bike?

 

[jimsplans1]

not that i know i paid the last shop to rebuild carb its wierd man ran 1 weekend for my buddy the next nothing

 

[jimsplans1]

tried spraying either in the carb to still no go

 

[duneracerweston]

Spray ether around the carb boot between the carb and jug

 

[jimsplans1]

ok ill try that man this sucks

 

[jimsplans1]

its getting to hot to ride here

 

[jimsplans1]

any other ideas im gonna try all this stuff in the morning

 

[duneracerweston]

Ya its 100+ here if that boot suckes up the ether then that boot is bad