What's wrong now

[1statv]

I'm lost dead last more info dead last please

 

[sparkymichigan]

All he is saying is like I said. Make sure your adjusters are adjusted out the same amount and that your carrier is seated against the adjusters. If this is done the carrier will be square with the swingarm.

 

[1statv]

Ok so I think my rear end (frame) is bent tell me what you think.

Look at grab bar on down to the swing arm

My axle and spring arm is fine the gap from the red plastic to the rear tires came from the frame being bent

 

[Gen1Pat]

Yep. That's your problem. Sucks to be you right now. lol.

 

[1statv]

Any way to fix that or I'm I short of a quad now??

 

[bones]

here is how to fix it

http://www.ebay.ca/itm/Yamaha-Warri...Parts_Accessories&hash=item564e8a4a25&vxp=mtr

 

[1statv]

Damn this sucks major

 

[1statv]

Any other frames I can use ??

 

[Gen1Pat]

You can use a 1st gen but it's not a good idea. Look on ebay and on craigslist.

 

[bones]

any warrior/raptor 350 frame 89-12

 

[1statv]

What are the consequences of riding the warrior like this till I get frame??

 

[YAMAHAULER]

breaking chains and it's possible to break motor mounts and or engine case depending where the frame is bent

 

[sparkymichigan]

I've got a frame on the cheap. It's from a '91. I don't need it. But I'm not shire how a guy would ship it.

 

[1statv]

@yamahahauler to me it looks like the frame is bent from the rear starting about 5-10 inches before the rear grab bar mounts.

 

[YAMAHAULER]

well then it should be fine if it's just the rear seat part of the frame nothing drive train wise is connected to that part of the frame. might even be able to unbend it with a little prying just make sure there are no cracks or breaks anywhere first

 

[1statv]

Ok I'm thinking the previous owners scrapped ground when wheeling as a possible cause