Wont Start

[Josh_Richardson]

I have a 2000 warrior and it wont start. I was riding one day and it died on me and wouldnt start back up i was pretty sure it was a fuel problem so i put a little gas into the carb and it fired right off and then died again. in the prosses of figuring all of that out i was cranking on it quite a bit and now it wont turn over at all not even turning over the starter. i replaced the started and solenoid with factory parts and same thing. the battery has 11.8v. Should be enough to start it. Any help would be great. Thanks

 

[Josh_Richardson]

Just pulled starter off and tried to see if it would free spin the starter and nothing.
How do i check my start botton switch?

 

[Gen1Pat]

Get out a test light and prob the wires in the switch itself. With and without holding the button down. You may have to prob all the wires going to and from the switch. Check all your connections, too.

 

[alex456123]

i think you burned out your soloniod. and you should probley clean your carb.

 

[Gen1Pat]

Have you tried to jump the poles on the solenoid?