Write-up for Clutch replacement??

[rono]

Anyone have a write-up for replacing the clutch? ... Thinking about doing it soon.. Gonna replace the cable and add an extra steel plate. Not much adjustment left, 1 turn and slipping, one turn the other way, grabs right off the bat.

 

[tyler]

Its not that hard to do just once you get it all apart put it back together the way it came apart i did it on my warrior when i was 15 bymyself so it cant be that hard lol

but here is a link that will help you out when adding a plate in the clutch.

http://www.yfm350.com/forums/showthread.php?t=15097

And if you are going to add a plate to the clutch and replace the cable you should go ahead and do the raptor clutch set up here is a link to it. It will make the pull of the clutch lever 10 times easier to pull.

http://www.yfm350.com/forums/showthread.php?t=20450

 

[rono]

Any special tools needed? I did see something in the service manual about a tool to hold the clutch while removing the main bolt.

I just was wondering what all had to be removed... brake pedal? footrest? etc..

 

[DeadLastRacing]

Hillbilly engineering

You can also make the clutch tool outta a pieace of steel and two bolts, the clymer manuel even shows you how to.

 

[baddawg]

The holder I made,worked great.

 

[rono]

Thanks for the pics... Looks like Hillbilly Engineering to the rescue!

 

[tyler]

i didn't have to use a tool i just used an impact wrench.