Yes YZF Shocks do fit....(some mods required)

[97warriorrider]

read a lil more..its Duplicolour Anodizing paint

 

[97warriorrider]

did u use a primer or the duplicolour ground coat first?

 

[deadaim]

haha my bad i thought i read every post but i guess i missed that one... Thanks 97warrior...man that is a badass warrior you've got warriorcliff

 

[warriorcliff77]

No i didn't. When i used the scouring disk, it left a cool pattern in the metal, and i wanted it to show through. (the paint is semi transparent).

 

[97warriorrider]

i see with my frame im using the duplicoulour ground coat..

 

[m4skinner]

To notch it out i used a die grinder. Yes after drilling the new holes you have to grind off the tabs. (meaning you can no longer use stock length warrior shocks.)

Why can't you use the stock shocks any more ? They would still fit but it would lower the front a 1/2 inch right.

 

[warriorcliff77]

Yes, it would lower it, not sure how much but i'm sure it would be lot more that 1/2 inch, as the new holes are inward as well I haven't tryed them back on yet.

 

[drew413]

Works good with 660 a-arms too