Yfz450 spindle?

[430stroker]

Hey does anyone know if the yfz450 spindle will fit on warrior. Mainly just need to know if the shaft for the upper and lower ball joints r the same

 

[430stroker]

Ok so 32 views and not a soul that can give advice. So far found out that ball joint shafts r the same size but now need to know if any different angle in spindle where ball joints mount. Come on guys what the hell happened to trying to upgrade ****

 

[YAMAHAULER]

obviously no one has tried it yet you'll have to be the Guinea pig and be the first to see if it will work

 

[beastlywarrior228]

Dont really see how it would be better though

 

[sparkymichigan]

What are you looking to gain? You will need to know if the tie rod ends are different also.

 

[bones]

they dont fit ... top ball joint hole is about 3/4 further in then warrior

 

[duneracerweston]

But the ball joints and and tierods are correct, I know because I talked to the guys at asr and they said Yamaha is Yamaha on ball joints. They all have the same taper.

 

[430stroker]

I am wanting to do cause the 450 steering arm is cast with the spindle opposed to the warrior that bolts on seem to me it would be stronger and I am also wanting to do so cany use the 450 dual piston calipers up front

 

[alex456123]

you can use those calipers up front any ways dude they are a direct bolt up

 

[bones]

you can use those calipers up front any ways dude they are a direct bolt up

not for the first gens tho .. we need gen 2 spindles

 

[alex456123]

no we dont im gunna make mounts!

 

[S.E.Warrior97-2001]

Yea make sure u have second gen !!!!!! mine is a 99 had all first gen brake parts.... I had to borrow ,buy, cobble parts but i did get it together Thanx again hauler.....

 

[357warrior]

i gt yfz450 spindles on mine but im using 400ex a arms and ball joints i hollowed the balljoint holes out and they work great

 

[beastlywarrior228]

I am wanting to do cause the 450 steering arm is cast with the spindle opposed to the warrior that bolts on seem to me it would be stronger and I am also wanting to do so cany use the 450 dual piston calipers up front

Bolted or one piece wont make any noticeable difference in strength

 

[lbjamm]

In fact, bolted is prolly stronger and if it breaks it is easier to replace jmo

 

[bones]

i gt yfz450 spindles on mine but im using 400ex a arms and ball joints i hollowed the balljoint holes out and they work great

pics or stfu... lol but i would like to see your set up

 

[YAMAHAULER]

Yea make sure u have second gen !!!!!! mine is a 99 had all first gen brake parts.... I had to borrow ,buy, cobble parts but i did get it together Thanx again hauler.....

So that's where my extra spindals went ! I couldn't remember what I did with them haha!:loco: I'm loosing it

 

[430stroker]

Mine warrior is a 98. Will the Yfz calipers bolt up to it. And will stock warrior brake master push enough fluid or will I need go with the Yfz

 

[bones]

they bolt right on and yes your master will push'em

 

[430stroker]

Thanks much help saved me lot of money too